Filter
Top Products
24
6. If Conn. State remains as “Connecting to Internet,” do the following:
• Close the pop-up window.
• Turn the cable modem power off then on, and check the WAN LED status.
7. Re-click the “Apply” button.
8. Check the WAN Connection Status: If the status is “Successfully connected,”
click “Show Internet Information” to enter the WAN status page; or click Status —>
WAN Status, as shown.
If the WAN connection is successfully established, you can see the following:
• Connection Type should be “Cable Modem (DHCP)”
• Connection Status should be “Successful connected”
• Physical Address shows the router WAN port MAC address
• WAN IP Address, Subnet Mask, Default Gateway, Primary DNS Server and
Secondary DNS Server depend on your system configuration and information
provided by the ISP.