Filter
Top Products
38
NOTE: It is strongly recommend that you change the administrator
username and password during the initial setup. Failing to do so will allow
any user to access the router’s administrator menu and change the
configuration.
NOTE: If want to restore the factory default values, turn off the router, press
the Reset button on the back of the device, and turn on the router while
keeping the Reset button pressed. About 5 seconds later, the RUN LED will
flash rapidly and you can then release the button. Once the startup sequence
is complete, all configuration data will be restored to the default onfiguration.
4.7.2 Firmware Upgrade
Click “System” —> “Firmware Upgrade.”
Firmware updates may be available from time to time for the router. Before
contacting technical support, make sure that you have the latest firmware version
installed on the router.
Upgrade procedure:
1. Download an updated firmware version from www.intellinet-network.com.
2. Save the file on your local hard drive.
3. Uncompress the ZIP file.