Filter
Top Products
21
6. If Conn. State remains as “Connecting to Internet,” do the following:
• Close the pop-up window.
• Turn the cable modem power off then on, and check the WAN LED status.
7. Re-click the “Apply” button.
8. Check the WAN Connection Status: If the status is “Successfully connected,”
click “Show Internet Information” to enter the WAN status page; or click Status ➝
WAN Status, as shown.
If the WAN connection is successfully established, you can see the following:
• Connection Type should be “Cable Modem (DHCP)”
• Connection Status should be “Successful connected”
• Physical Address shows the router WAN port MAC address
• WAN IP Address, Subnet Mask, Default Gateway, Primary DNS Server and
Secondary DNS Server depend on your system configuration and information
provided by the ISP.
The “Disconnect” button causes the router to release the WAN port IP address and
disconnect from the Internet.