Filter
Top Products
6
2.3.2 Model 523615, 8-Port
LED Indication
PWR Continuously lit indicates power to the router.
RUN/CPU Slowly blinking indicates the system is operational after a proper startup.
WAN Blinking indicates data is being transmitted to/from the Wide Area
Network.
1–8 Blinking indicates data is being transmitted to/from the Local Area
Network.
RESET Approx. 5 seconds after pressing to turn on the power, the RUN LED sill
blink quickly. Release the RESET button. (After router Reset startup, all
configurations will restore to defaults.)
Port/Jack Indication
DC 5 V Connects to the power adapter.
WAN Connects xDSL/cable modem or special cable.
1–8 The LAN ports connect to PCs, hubs, switches and so on.
3. LOCAL COMPUTER SETUP
The High-Speed Broadband Router acts as a DHCP server, which means that it
provides IP addresses to all connected computers. By default, Windows, Linux and
Mac OS systems will try to obtain an IP address from a DHCP server, if present and
no configuration of the computer’s IP settings are necessary. In order to test your IP
settings, simply start your computer while connected to the router. Then open your
Web browser and open http://192.168.10.1.
If the router’s Web Admin screen appears, you can skip this section and proceed