Filter
Top Products
SSID: The SSID of this wireless router is shown
here.
Authentication Mode: The wireless security
authentication mode of this wireless router is shown
here. If you don't enable the security function of the
wireless router before WPS is activated, the router
will auto-set the security to WPA (AES) and
generate a set of passphrase keys for WPS
connection.
Passphrase Key: The wireless security key of the
router is shown here.
Config Mode (3) There are 'Registrar' and 'Enrollee' modes for the
WPS connection. When 'Registrar' is enabled, the
wireless clients will follow the router's wireless
settings for a WPS connection. When 'Enrolle' mode
is enabled, the router will follow the wireless
settings of wireless client for a WPS connection.
Configure Click 'Start PBC' to start a Push-Button style WPS
via Push Button (4) setup procedure. This wireless router will wait for
WPS requests from wireless clients for 2 minutes.
The 'WLAN' LED on the wireless router will be on
for 2 minutes when this wireless router is waiting
for an incoming WPS request.
Configure Enter the PIN code of the wireless client you
via client wish to connect, and click the 'Start PIN' button.
PinCode (5) The 'WLAN' LED on the wireless router will be on
when this wireless router is waiting for an incoming
WPS request.