Filter
Top Products
A p p e n d i c e s
58 U s e r ‘ s G u i d e
Device address
Follow these steps to change the device address:
1.
Switch the Intermate LX T-04 off.
2.
Select a new device address (positions 0-6).
3.
Switch the Intermate LX T-04 on.
A warning for change of device address is printed.
4.
Step the address switch one position forward, and then back.
The new device address is confirmed by a printed message.
Test Mode
Test Mode is reached from normal print operation. It is used to access a number
of internal functions. Normal print operation is inhibited.
1.
Make a note of the current Address Switch position (device address).
2.
Set the address switch to position '9'. When the SYSTEM indicator starts
to flash, you can select one of the following Test Mode functions: