Filter
Top Products
46 EasyLAN Wireless Interface Kit Installation Instructions
Chapter 5 — Setup in IPL
To reinstall the default root CA certificate, install /rom/intermec.cer, or
remove the /c/ADMIN/root.cer file.
Examples
<STX><SI>ws,EAP_TYPE,TTLS|LEAP|PEAP|OFF<ETX>
Sets preferred EAP type.
<STX><SI>ws,.EAP_USER,Admin01<ETX>
Sets logon user name to “Admin01”.
<STX><SI>ws,EAP_PASS,InfoTech<ETX>
Sets logon password to “InfoTech”.
Note: It is not possible for any user to read the EAP_PASS
value.
<STX><SI>ws,TTLS_USER,Manufacturing<ETX>
Sets TTLS outer name to “Manufacturing”.
<STX><SI>ws,INNER_AUTH,PAP|MSCHAPv2|EAP/
MSCHAPv2|EAP/MD5|EAP/GTC<ETX>
Sets inner authentication type (TTLS/PEAP only).
<STX><SI>ws,CA_CERT,/tmp/mycacert.cer<ETX>
Installs overriding CA certificate (TTLS/PEAP only).
<STX><SI>ws,CA_CERT,/tmp/mycacert.pfx@
verysecret<ETX>
Installs overriding CA certificate with pass phrase “verysecret”(TTLS/
PEAP only). is method can be used only when the certificate has
already been transferred to the printer (for example, via FTP or an
installed Compact Flash card).
<STX><SI>ws,DOWNLOAD_CA<ETX>
Start receiving the CA certificate via Zmodem and install it.
<STX><SI>ws,DOWNLOAD_CA,verysecret<ETX>
Start receiving the CA certificate via Zmodem and install it, using the
pass phrase “verysecret”.
<STX><SI>ws,.SERVER_CN1,Printer33<ETX>
Sets common name 1 to “Printer33” (TTLS/PEAP only).
<STX><SI>ws,.SERVER_CN2,Printer34<ETX>
Sets common name 2 to “Printer34” (TTLS/PEAP only).