Filter
Top Products
11
Installation
Setup and Installation
Plug your USB keyboard and USB mouse into the USB Ports located on the unit’s front panel. Plug your
monitor into the Console monitor port located on the unit’s rear panel.
Plug the custom SPDB15 connector of the KVM cables into any available CPU ports on the switch and plug
the accompanying microphone and speaker cables into the CPU port’s microphone and speaker jacks.
Plug the other end of the KVM cable to the
respective ports on the computer.
1.
2.
3.
For a PS/2 connection, you will need to
purchase the PS/2 KVM cable (IOGEAR Part
No. G2L5302P), plug the keyboard, mouse,
video, microphone and speaker cables into their
respective ports on the computer.
Note: For computers with older operating systems, such as Windows ME or prior, you may have to load the USB driver. Keep your OS CD ROM
handy during installation. If it is the first time you load the USB driver on this type of computers, there is a big chance that you may need to keep the old
keyboard and mouse on that computer until the driver is loaded.