Filter
Top Products
21
Hotkey Beeper Control
The Beeper can be hotkey toggled On and Off. To toggle the Beeper, do the following:
1. Invoke Hotkey Mode. (See Pg. 16)
2. Press and release the B key.
The Beeper toggles On or Off. The Command Line displays
Beeper On
or
Beeper Off
for one second; then the message disappears and you automatically exit Hotkey Mode.
Operation
The Basic Hotkey Operation can be changed from tapping the Scroll Lock key twice to tapping the Ctrl key
twice by doing the following:
1. Invoke Hotkey Mode (See Pg. 16)
2. Press and release the T key
You automatically exit Hotkey Mode after this procedure.
Note: This hotkey is a toggle between the two invocation methods. To revert back to the original Hotkey Invocation methods, invoke Hotkey Mode, then press
and release the T key. The basic Hotkey reverts back to [[Scroll Lock] [Scroll Lock].