Filter
Top Products
3030
3030
30
BIOS SETUP UTILITY
IDE Configuration
v02.54(C) Copyright 1985-2003, American Megatrends, Inc.
Advanced
OnBoard IDE Controller
OnBoard SATAIIController
SATAII Operation Mode
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
SATAII 1
SATAII 2
[Both]
[Enabled]
[non-RAID]
[Hard Disk]
[Not Detected]
[ATAPI CDROM]
[Not Detected]
[Not Detected]
[Not Detected]
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
DISABLED: disables the
integrated IDE
Controller.
PRIMARY: enables only
the Primary IDE
Controller.
SECONDARY: enables
only the Secondary IDE
Controller.
BOTH: enables both IDE
Controllers.
3.3.43.3.4
3.3.43.3.4
3.3.4
IDE ConfigurationIDE Configuration
IDE ConfigurationIDE Configuration
IDE Configuration
OnBoard IDE Controller
You may enable either the primary IDE channel or the secondary IDE channel.
Or you may enable both the primary and the secondary IDE channels by
selecting [Both]. Set to [Disabled] will disable the both. Configuration options:
[Disabled], [Primary], [Secondary], [Both].
OnBoard SATAII Controller
Use this item to enable or disable the “OnBoard SATAII Controller” feature.
SATAII Operation Mode
Use this item to adjust SATAII Operation Mode. The default value of this
option is [non-RAID]. If you want to operate RAID function on SATA / SATAII
HDDs, please select [RAID].
IDE Device Configuration
You may set the IDE configuration for the device that you specify. We will
use the “Primary IDE Master” as the example in the following instruction,
which can be applied to the configurations of “Primary IDE Slave”, “Sec-
ondary IDE Master”, and “Secondary IDE Slave” as well.