![](http://pdfasset.owneriq.net/e/c1/ec1d2e7e-1f87-433f-98fe-a0884359dcbc/ec1d2e7e-1f87-433f-98fe-a0884359dcbc-bg1b.png)
■
One LC full duplex connector
■
Transmit power:
■
min: –8.2 dBm
■
max: 0.5 dBm
■
Receive input power:
■
min: –14.4 dBm
■
max: 0.5 dBm
■
See the following corresponding table (LR Fiber Optic Cabling) for cabling
requirements.
■
See E320 Hardware Guide, Chapter 5, Cabling the Router for more information.
Cables and connectors
(single-mode [LR])
■
One LC full duplex connector
■
Transmit power:
■
min: –4.7 dBm
■
max: 4.0 dBm
■
Receive input power:
■
min: –15.8 dBm
■
max: –1.0 dBm
■
See the following corresponding table (ER Fiber Optic Cabling) for cabling
requirements.
■
See E320 Hardware Guide, Chapter 5, Cabling the Router for more information.
Cables and connectors
(single-mode [ER])
Board-level LEDs:
■
OK (green)—Physical link is connected properly and is functioning properly
■
FAIL (red)—Failure detected
Port LEDs:
■
LK (green)—Ethernet link is up
■
ACT (green)—Blinks when there is Ethernet traffic being received
LEDs
■
See Monitoring Ethernet Interfaces in JUNOSe Physical Layer Configuration Guide,
Chapter 5, Configuring Ethernet Interfaces.
Alarms, errors, and events
10GE IOA ■ 27
10GE IOA