Filter
Top Products
LM-10 Line Module
ES2 10G LM
Module label
■
Not applicable
Number of ports
■
First supported: 8.0.0
Software release
■
215 W
■
Acts as frame forwarding engines for the physical interfaces
■
Processes up to 10 Gb of data traffic
■
Pairs with ES2–S2 10GE PR IOA and ES2–S1 GE-8 IOA
■
In a SRP-100 configuration, it must be installed in a turbo slot only (slot 2 or slot 4)
■
If you install the line module in a slot other than slot 2 or slot 4, it will be disabled
■
If you install the LM-10 module next to a configured line module that is already
installed in slot 3 or slot 5, the LM-10 module will be disabled
■
If you install a line module in slot 3 or slot 5 next to a previously installed LM-10
module, the non-LM-10 module will be disabled
■
In a SRP-320 configuration, it can be installed in any slot
Description
■
Supports a line rate of 128–byte frames on IOAs
■
The 100–Gbps switch fabric allocates 3.4 Gbps of overall bandwidth to each regular
line module slot and 10 Gbps of overall bandwidth to each of the turbo slots (slot 2
and slot 4).
■
The 320–Gbps switch fabric allocates 10 Gbps of overall bandwidth to each line module
slot.
■
See JUNOSe System Basics Configuration Guide, Chapter 6, Managing Modules for more
information.
Capability
■
Not applicable
Software features
■
Not applicable
Line module compatibility
■
SRP-100
■
SRP-320
SRP module compatibility
■
Yes (Redundancy IOA must be installed in either slot 0 or slot 11)
■
Can only backup another ES2 10G LM
Line module redundancy
compatibility
■
Not applicable
Port redundancy support
■
Not applicable
Cables and connectors
LM-10 Line Module ■ 9
LM-10 Line Module