Juniper Networks E320 Network Router User Manual


 
OC3/STM1-8 ATM IOA
ES2-S1 OC3-8 STM1 ATM IOA
IOA label
8
Number of IOA ports
First supported: 7.0.1
Software release
50 W
Half-height module
See Slot Combinations on page 63 for more information on combining IOAs in a
slot.
Uses a range of small form-factor pluggable (SFP) transceivers to support different
modes and cable lengths.
Description
OC3/STM1
ATM
Capability
See OCx/STMx ATM IOAs on page 53 for information about the layer 2 and layer
3 protocols and applications that this module combination supports.
Software features
ES2 4G LM
Line module compatibility
SRP-100
SRP-320
SRP module compatibility
Can be paired with an ES2 4G LM.
Must be installed in the same redundancy group as an ES2 4G LM and ES2S1
REDUND IOA combination.
Line module redundancy
compatibility
Not applicable
Port redundancy support
Up to eight LC full duplex connectors
Transmit power:
min: 20 dBm
max: 14 dBm
Center wavelength: 1310 nm
Receive input power:
min: 30 dBm
max: 14 dBm
Rated for 2 km (1.2 miles) over 62.5-micron core cable with an optical loss of 0-9
dB or 50-micron core cable with an optical loss of 7 dB
See E320 Hardware Guide, Chapter 5, Cabling the Router for more information.
Cables and connectors
(multimode)
OC3/STM1-8 ATM IOA 33
OC3/STM1-8 ATM IOA