![](http://pdfasset.owneriq.net/b/d1/bd1f4907-426b-4ef6-abca-6867aded8281/bd1f4907-426b-4ef6-abca-6867aded8281-bg3a.png)
CHAPTER 3
Installing ERX Modules
3-12
Figure 3-9 Installing a module in the ERX-1400 series
9 Insert the module into the midplane by simultaneously depressing
both ejectors (as shown in Figure 3-7) and exerting forward pressure
on the module.
10 Tighten the module’s captive screws using a Phillips screwdriver.
Turn both screws several times before tightening them completely to
allow the module to sit correctly.
Line Module I/O Module
Ejector in open position