Filter
Top Products
•
Enter the hostname. This is optional.
•
Enter a password and reenter the password.
•
Specify the time zone.
•
Synchronizethe date and time settingsof the switchwith the management PC or
set them manually by selecting the appropriate option button. This is optional.
Click Next.
7. Use the Management Options page to select the management scenario:
NOTE: On EX4500 and EX8200 switches, only the out-of-band management option
is available.
•
In-band Management—Use VLAN 'default' for management.
SelectthisoptiontoconfigurealldatainterfacesasmembersofthedefaultVLAN.
Click Next. Specify the management IP address and the default gateway for the
default VLAN.
•
In-band Management—Create new VLAN for management.
Select this option to create a management VLAN. Click Next. Specify the VLAN
name,VLANID,memberinterfaces,managementIPaddress,anddefaultgateway
for the new VLAN.
•
Out-of-band Management—Configure management port.
Selectthisoption toconfigure onlythemanagementinterface. ClickNext.Specify
the IP address and default gateway for the management interface.
8. Click Next.
9. On the Manage Access page, you may select options to enable Telnet, SSH, and
SNMP services. For SNMP, you can configure the read community, location, and
contact.
10. Click Next. The Summary screen displays the configured settings.
11. Click Finish.
The configuration is committed as the active switch configuration. Youcan now log in
with the CLI or the J-Web interface to continue configuring the switch.
If you use the J-Web interface to continue configuring the switch, the Web session is
redirected to the new management IP address. If the connection cannot be made, the
J-Web interface displays instructions for starting a J-Web session.
169Copyright©2010,Juniper Networks,Inc.
Chapter12:PerformingInitialConfiguration