10. Replace the accessory box on top of the packing foam.
11. Close the top of the cardboard shipping box and seal it with packing tape.
12. Write the RMA number on the exterior of the box to ensure proper tracking.
Packing EX3200 or EX4200 Switch Components for Shipping
CAUTION: Donotstackswitchcomponents.Returnindividualcomponentsinseparate
boxes if they do not fit together on one level in the shipping box.
To pack and ship switch components:
•
Place individual boards in antistatic bags.
•
Ensure that the components are adequately protected with packing materials and
packed so that the pieces are prevented from moving around inside the carton.
•
Close the top of the cardboard shipping box and seal it with packing tape.
•
Write the RMA number on the exterior of the box to ensure proper tracking.
Related Topics • Returning an EX3200 or EX4200 Switch or Component for Repair or Replacement on
page 199
• Removing a Fan Tray from an EX3200 or EX4200 Switch on page 176
• Removing a Power Supply from an EX3200 or EX4200 Switch on page 174
• Removing an Uplink Module from an EX3200 or EX4200 Switch on page 177
• Removing a Transceiver from an EX Series Switch on page 179
Copyright ©2010,Juniper Networks,Inc.204
CompleteHardwareGuide forEX3200 andEX4200 EthernetSwitches