Filter
Top Products
39
Adjusting Picture Quality (Cont.)
Operating the Main Menu (Cont.)
5
Press MENU/ENTER toward the 2 or 3
mark to adjust the selected item.
■ For video system input
• To adjust multiple items, repeat steps 4 and 5.
• To reset all items (to factory-set adjustment values, “0”), press
MENU/ENTER toward the 5 or ∞ mark to select “ALL
RESET”, and press MENU/ENTER.
• To reset only the selected items (ALL RESET excluded) to
the factory-set adjustment value, press the remote control’s
PRESET button. The selected item is reset to the factory-set
adjustment value.
Notes
• The adjustment item, TINT, is displayed only for NTSC system. It is not
displayed (cannot be adjusted) when PAL or SECAM system signals are
input.
• When video signals are input to the COMPUTER IN-2 terminal, adjustment
items “COLOR” and “TINT” are indicated but cannot be adjusted.
■ For computer system input
• To adjust multiple items, repeat steps 4 and 5.
• To reset all items (to factory-set adjustment values, “0”), press
MENU/ENTER toward the 5 or ∞ mark to select “ALL RESET”,
and press MENU/ENTER.
• To reset only the selected items (ALL RESET excluded) to the
factory-set adjustment value, press the remote control’s PRESET
button. The selected item is reset to the factory-set adjustment
value.
Gets darker.
(–30 ← 0 ← +30)
Gets brighter.
(–30 → 0 → +30)
Gets lower.
(–30 ← 0 ← +30)
Gets higher.
(–30 → 0 → +30)
Gets softer.
(0 ← 7)
Gets sharper.
(0 → 7)
Gets softer.
(–30 ← 0 ← +30)
Gets deeper.
(–30 → 0 → +30)
Gets reddish.
(–30 ← 0 ← +30)
Gets greenish.
(–30 → 0 → +30)
Resets all adjustment values of
items on the PICTURE menu to
the factory-set values (0).
Adjustment item Button Adjustment content
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR
TINT
ALL RESET
2
3
2
3
2
3
2
3
2
3
MENU/
ENTER
■Remote control unit
■Submenu items
Notes
• The selected item is shown in magenta color. Items shown
in gray color cannot be operated or set in the current mode.
• Adjustment items (on the PICTURE menu) are different when
AV signals are input and when computer-related signals are
input.
(To be continued on the next page)
[PICTURE menu]
PICTURE
(NTSC(480i))
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR –
TINT
ALL RESET
0
0
3
3
1
M
E
N
U
/
E
N
T
E
R
QUICK
ALIGN.
AV HIDE
OPERATE
PRESET
AV
SHIFT ZOOM FOCUS
LENS
UT
+
DW
–
RGB/COMPUTER
LENS
LOCK UNLOCK
PAGE BACK
PAGE BACK button
MENU/ENTER button
M5000LU/SCU p.33-43 01.3.5, 15:0839