Filter
Top Products
47
Setting Up Channels
Submenu item [CHANNEL]
Operating the Main Menu (Cont.)
■ Remote control unit
■Main menu
Notes
• The selected item is shown in magenta color. Items shown
in gray color cannot be operated or set in the current mode.
• Items that can be set are different when video signals are
input and when computer signals are input.
• For dedicated source signals (corresponding frequency, etc.)
for computer signals, see page 19.
NTSC(480i)
ENGLISH
PIXEL CLOCK
POSITION
PICTURE
OPTIONS
SOURCE
CHANNEL
USER SOURCE SET UP
DISPLAY SIZE
DECODER
LANGUAGE
YPBPR
CH: 1
HDTV(1080i)
M
E
N
U
/
E
N
T
E
R
QUICK
ALIGN.
AV HIDE
OPERATE
PRESET
AV
SHIFT ZOOM FOCUS
LENS
UT
+
DW
–
RGB/COMPUTER
LENS
LOCK UNLOCK
PAGE BACK
When you set up channels, you can select a line and a multiple of
sources (up to 30) for each channel. If you are using a switcher and
set switcher numbers, you can also select each channel from the
switcher side.
Memo
• With multiple sources having been set on channels, when a channel is
selected, incoming signal is automatically checked and switched to one of
the sources registered on the channel.
If a matching source is not found among the registered sources, the most
approximate source of the sources registered will be selected.
1
Press the MENU/ENTER button.
• The main menu appears on the screen.
2
Press MENU/ENTER toward the 5 or ∞
mark to select a submenu item,
“CHANNEL”.
• The selected item (text display) is shown in magenta color.
3
Press the MENU/ENTER button to set.
• A submenu item, “CHANNEL setup/selection menu”, appears
on the screen.
•If no “LINE”, “SOURCE” or “SWNo” item is registered,
unregistered characters (7) are displayed on the screen.
PAGE BACK button
MENU/ENTER button
(CHANNEL setup menu)
4
Press MENU/ENTER toward the 5 or ∞
mark to select the channel (CH) whose
contents you want to change.
• The selected CH is shown in magenta color.
5
Press MENU/ENTER toward the 2 or 3
mark to select the item to set (LINE,
SOURCE or SWNo).
• The selected item is shown in magenta color.
• Unregistered channel items (LINE, SOURCE or SWNo) can also
be selected. However, “LINE” and “SOURCE” need to be already
set.
6
Press MENU/ENTER to set.
• Channel items LINE, SOURCE and SWNo) for the “CH” selected
on the “CHANNEL setup • selection” menu are set.
• For how to set each item, see pages 48 to 51.
1
2
3
4
5
6
7
8
9
(AUTO)
CHANNEL
NTSC(480i)
PAL/SECAM
777777777
777777777
777777777
777777777
777777777
777777777
777777777
777777777
10
77777
77777
77777
77777
77777
77777
77777
77777
Y/C
VIDEO
1
2
77
77
77
77
77
77
77
77
CH
LINE
SOURCE
SW N o
M5000LU/SCU p.44-58 01.3.5, 15:0947