JVC DT-V24L1 Computer Monitor User Manual


 
5
7 Installing the monitor in the rack
Use a JVC’s RACK MOUNT ADAPTER (RK-C20L1; not supplied).
CAUTION
Detach the stand first.
Ask your dealer to install.
To adjust the stand height
You can select the stand height—higher position or lower position.
To change the stand height, change the position of the stand plate as illustrated below after detaching the stand
from the monitor.
• For detaching the stand, see “To detach the stand” on page 4.
<Higher position> <Lower position>
Screw holes for higher position Screw holes for lower position
Stand plate
Stand plate
Stand body
Stand body
To prevent an accidental fall
Fix the stand to a table or floor with M5 screws (not supplied).
• Choose the screws of proper length corresponding to the thickness of the table or floor.
Screw holes
(See page 18 for the specifications of the screw holes.)
Screw holes
(See page 18 for the specifications of the screw holes.)
The illustration of the monitor is of DT-V24L1D.
<Top side view>
(DT-V20L1D and DT-V20L1 only)
DT-V2420L1D_UA_R.indd 5DT-V2420L1D_UA_R.indd 5 06.11.17 10:40:13 AM06.11.17 10:40:13 AM