Filter
Top Products
20
Video Adjustments (Continued)
To make an adjustment while viewing the adjustment
bars
After step 3 on page 19, proceed as follows:
1 Press 5/∞ to move the cursor (3) to “sub menu.”
2 Press 3 to display the Sub Menu.
The Sub Menu for R GAIN appears on the screen.
3 Press 5/∞ to select the Sub Menu you want to adjust.
Each time you press the button, the Sub Menu changes as
follows:
4 Press 2/3 to adjust the selected item.
5 Repeat steps 3 and 4 to adjust the other items.
6 Press MENU/EXIT (or MENU on the Monitor) three times
to exit from the menu operations.
To reset the adjustments
After step 3 on page 19, proceed as follows:
1 Press 5/∞ to move the cursor (3) to “reset.”
2 Press 3.
The confirmation screen appears.
3 Press 3 again to reset the adjustments.
To cancel the reset, press MENU/EXIT (or MENU on the
Monitor).
: 000
R GAIN
+
–
Are you sure?
"YES"
then key.
"NO" then key.
MENU
reset
R GAIN G GAIN
B GAIN
MENU INPUT POWER
MENU INPUT POWER
MENU
2 / 3
5
5 /
*
1
“PICTURE MODE” and “SIGNAL MODE” do not
appear at the same time.
“PICTURE MODE” appears when RGB input (either
RGB A or RGB B) is selected, and one of the following
signals comes in—RGB15K-50, RGB15K-60, and
VGA480-60. On the other hand, “SIGNAL MODE”
appears when VIDEO A, VIDEO B, or COMPONENT
input is selected.
*
2
“RGB/COMPO.” appears only when the RGB B or
COMPONENT input is selected.
MENU/EXIT
2 / 3
5 /
5
DISPLAY ASPECT POWER
RGB A
COMPO.
VIDEO BVIDEO A
MUTING
MENU/EXIT
RM-C576 REMOTE CONTROL UNIT
VOLUME
RGB B
14-23.GM-P420[US]f 02.4.1, 2:20 PM20