Filter
Top Products
14 EN
FOR WINDOWS
®
95
VERSION 4.00.950 OR 4.00.950A
Before you use the DVC Capture Board, you must install the DV Capture Board drivers. If you
have not done so already, install the DV Capture Board (See p. 8). Follow these steps to install
the drivers:
1
Turn on your computer. Put the included
JVC CD-ROM in your CD-ROM drive.
The New Hardware Found Window is
displayed.
The New Hardware Found Window is
displayed.
2
In the New Hardware Found Window
select Driver from disk Provided by
hardware manufacturer. Then click the
OK button.
3
If you know the drive letter for your CD-
ROM drive enter it in the box below
Copy manufacturer’s files from: and go
to step 5. If you do not know the driver
letter for your CD-ROM drive continue
with the next step.
INSTALLING DV CAPTURE DRIVERS (cont.)