Filter
Top Products
18 EN
SUPPLYING THE POWER
Charging the battery
Use the provided AA-V68 AC adapter/Charger for charging the battery. Batteries that have not
been completely depleted can also be charged.
•Approximate charge time → Approx. 90 min for each BN-V607 battery
•Charging not possible → Charging is not possible when the DC cord is
connected to the AC adapter.
•Number of prints per battery charge → 40 prints for each BN-V607 battery (at room
temperature)
NOTES
:
•If you connect the DC cord to the AC adapter during battery charging, power is supplied to the printer
and charging stops.
•When charging the Battery for the first time or after a long storage period, the Charger Indicator may not
light. In this case, remove the Battery from the AC Power Adapter then try charging again.
•Since the AC Power Adapter processes electricity internally, it becomes warm during use. Be sure to use
it only in well-ventilated areas.
•If the battery operation time remains extremely short even after having been fully charged, the battery is
worn out and needs to be replaced. Please purchase a new one.
1
CONNECT AC ADAPTER/CHARGER
•Connect the power cord to a wall outlet.
2
INSERT THE BATTERY
•The charge indicator starts to blink.
•Charging has completed when the indicator
stops blinking and is on continuously.
3
REMOVE THE BATTERY
•Remove the power cord.
DC output terminal
AC Adapter/Charger
AA-V68
Power cord
Charge indicator 2
(Blinks during charging → Lights continuously when charging completes.)
Power lamp
Battery BN-V607
To AC outlet
Charge
indicator 1
3
2
1
Place side with
and symbols
face down.