Filter
Top Products
EN 5
CAUTIONS
ABOUT THERMAL HEADS
•The thermal heads, necessary for printing, are located
within the unit. The heads can become extremely
warm. To prevent possible burns and injuries, do not
touch the thermal heads.
•When the printer is used for extended periods, the
thermal heads experience wear and tear just like VCR
heads. As the thermal heads become worn, print
quality will gradually decrease. When you notice a
decline in quality, it is possible that the heads may
need to be replaced. Consult your JVC dealer.
DUST
Due to dust or lint adhering to print paper, or to
extreme variations in temperature, a small degree of
colour smearing or lines may be visible in prints.
Failure to heed the following precautions may
result in damage to the printer.
1. DO NOT place the printer . . .
... in an environment prone to extreme temperatures
or humidity.
... in direct sunlight.
... in a dusty environment.
... in an environment where strong magnetic fields
are generated.
... on a surface that is unstable or subject to
vibration.
2. DO NOT place heavy objects on the printer.
3. DO NOT place anything which might spill on top of
the printer.
4. AVOID violent shocks to the printer during
transport.
CAUTION:
Changes or modifications not approved by JVC
could void user’s authority to operate the
equipment.
Exercise caution when moving the printer. If you
drop the unit, do not attempt to use it. If during use
you notice that the cabinet
is damaged, shut the
printer down, remove
power supply unit it and
contact your JVC dealer.
Use of the printer under
these conditions can lead
to fire or electric shock.
DO NOT place heavy objects on the AC power
adapters cords, or leave the cord near any heat-
generating appliance, as this can damage the cords.
Avoid excessive pulling or twisting of the power
cords. If the power cords
becomes cut or otherwise
damaged, contact your JVC
dealer. When unplugging the
AC power adapter, DO NOT
pull on the cord. Hold the
plug itself and remove it from
the AC outlet. Use of the
printer with a damaged power
cord can lead to fire, electric
shock and unit malfunctions.
DO NOT remove the cover and attempt to repair or
modify the printer. There are high-voltage
components within the
unit, and the risk of
electric shock and unit
malfunctions exists. If a
problem occurs, contact
your JVC dealer.
Illustrations of this printer may differ slightly
from production models.