Filter
Top Products
19
MONITOR
EDITSEARCH
FILTER
STATUS
SHUTTER
MENU
AUTO IRIS
BACK L
NORMAL
SPOT L
STRETCH
NORMAL
COMPRESS
FULL AUTO BLACK LOLUX
MODE
POWER
ON OFF
VTR
OPEN
VTR
CAM
1
3200K
5600K
5600K
5600K
ND
/
/
ND
2
.3
.4
1
8
1
64
CH-1
AUDIO INPUT
AUDIO SELECT
CH-2
CH-1 CH-2
FRONT
REAR
AUTO
MANUAL
AUDIO
LEVEL
CH-1 CH-2
PULL
OPEN
LCDBRIGHT DISPLAY
ZEBRA
AUDIO
LEVELE CH-1
OFF
ON
SKIN
AREA
AUTO
WHITE
ACCU
FOCUS
VTR
5
MODE
VTR
CAM
STATUS
SHUTTER
MENU
NETWORK
PACK
KA-DV5000
POWER
SUPPLY
ONOFF
C
F
Recording on a CF card
Recording video on a DV cassette tape and CF memory card
POWER switch
MODE switch
● “NO CF FORMAT!” will appear if the in-
serted CF memory card is not formatted.
Format the card in the MOVIE CLIP SET
menu screen. (
☞
page 18)
LCD screen
1.
Insert a CF memory card into the Network Pack.
2.
Turn on the GY-DV5000 and KA-DV5000 power.
Check to see that the
C
F
display appears on the LCD screen/viewfinder screen.
(When the power is turned on,
display will flash during initialization.)
3.
Insert a recordable DV cassette tape.
4.
Set the MODE switch to “CAM”. (Light the CAM indicator.)
5.
Set the NETWORK PACK CONFIG menu screen.
q Set MPEG REC to “TRIG”.
w Set the video/audio compression in the ENCODE SETUP menu screen.
(
☞
page 6)
e When completed with settings, press the STATUS button to return to the normal
screen.
6.
Press the VTR trigger button on GY-DV5000 to start recording on the DV cassette
tape as well as video/audio streaming data on the CF memory card.
● During CF memory card recording, ⅷ
C
F
display will light red.
7.
To stop recording, press the VTR trigger button.
8.
To resume recording, press the VTR trigger button once more.
9.
To end recording, press the VTR trigger button.
* Before turning off the power, check to make sure the
C
F
indicator on the LCD
screen is white.
Turning the power off when the
C
F
indicator is red will damage the recorded clip
file.
Memo
● When the DV cassette tape has reached the end during recording, CF memory
card recording will also stop.
● Every time recording is performed, the recorded event is stored in the clip list of
the CF memory card.
Stored contents of clip list: Clip number and date/time when recording was started.
All events can be played back on the MOVIE CLIP screen. (
☞
page 23)
● The CF memory card remaining warning is displayed on the LCD screen/viewfinder
screen. (
☞
page 46)
● If recording into the CF card is carried out within 5 seconds, either a file cannot be
made or it becomes difficult to display a thumbnail (a still picture displayed when
CLIP FILE is selected).
● Do not switch over the CAM/VTR mode during recording into the CF card. If the
mode is switched over during recording, the display of the LCD viewer can go
wrong once in a while. Also, if the mode is switched over immediately after the
start of recording into the CF card, some black images can be mixed into a re-
corded picture.
● When recording to a CF Memory Card while in the TRIG mode, ***.csv file will be
created for viewing using the CFViewer.
The CSV file name will be the value of the user's bit (UB) set in GY-DV5000. For
details concerning UB, please refer to the operator’s manual of GY-DV5000.
Time code on CSV files will differ slightly from the actual time code.
ENCODE SETUP menu screen
C
F
ⅷ
C
F
:Red display during
recording
: Initializing
NETWORK PACK CONFIG
menu screen
LCD screen
CF memory card
remaining warning
NET WOR K
TSE P. .U
TSE P. .U
ORTWENKACK
P
ON
C
IG
F
ENCODE
MPEG REC
T
RGI
MOV I E
C
LI
P
IMA N
C
ACNLE
MENU R ES E T
PAGE B
A
CK
TSE PU
(
W
M
Pund
r
8
)
e
(
C
F
Vi
ew
r
)
e
Set to TRIG
STATUS button
VTR trigger button
VTR trigger button
POWER SUPPLY
switch