Filter
Top Products
20
C
F
Recording on a CF card Recording video on a CF memory card only
1.
Insert a CF memory card into the Network Pack.
2.
Turn on the GY-DV5000 and KA-DV5000 power.
Check to see that the
C
F
display appears on the LCD screen/viewfinder screen.
(When the power is turned on, display will flash during initialization.)
3.
Set the MODE switch to “CAM”. (Light the CAM indicator.)
4.
Set the NETWORK PACK CONFIG menu screen.
q Set MPEG REC to “SPLIT”.
w Set the video/audio compression in the ENCODE SETUP menu screen.
(
☞
page 6)
e When completed with settings, press the STATUS button to return to the
normal screen.
5.
Press the VTR trigger button on side panel of GY-DV5000 to start recording stream-
ing data on the CF memory card.
● During recording, ⅷ
C
F
display will light red.
6.
To stop recording, press the VTR trigger button on side panel.
7.
To resume recording, press the VTR trigger button on side panel once more.
8.
To end recording, press the VTR trigger button on side panel.
* Before turning off the power, check to make sure the
C
F
indicator on the LCD
screen is white.
Memo
● When recording only to the CF memory card, the clip list will not be registered.
● The CF memory card remaining warning is displayed on the LCD screen/viewfinder
screen. (
☞
page 46)
● When MPEG REC is set to “SPLIT”, recording is performed only when the VTR
trigger button on the side is pressed. The VTR trigger buttons on the front and on
the lens are disabled.
● Do not switch over the CAM/VTR mode during recording into the CF card. If the
mode is switched over during recording, the display of the LCD viewer can go
wrong once in a while. Also, if the mode is switched over immediately after the
start of recording into the CF card, some black images can be mixed into a re-
corded picture.
● “NO CF FORMAT!” will appear if the in-
serted CF memory card is not formatted.
Format the card in the MOVIE CLIP SET
menu screen. (☞ page 18)
LCD screen
LCD screen
CF memory card
remaining warning
C
F
NETWORK PACK CONFIG
menu screen
ENCODE SETUP menu screen
Set to SPLIT
NET WOR K
TSE P. .U
TSE P. .U
ORTWENKACK
P
ON
C
IG
F
ENCODE
MPEG REC
S
PITL
MOV I E
C
LI
P
IMA N
C
ACNLE
MENU R ES E T
PAGE B
A
CK
TSE PU
(
W
M
Pund
r
8
)
e
(
C
F
Vi
ew
r
)
e
ⅷ
C
F
: Red display during
recording
: Initializing
MONITOR
EDITSEARCH
FILTER
STATUS
SHUTTER
MENU
AUTO IRIS
BACK L
NORMAL
SPOT L
STRETCH
NORMAL
COMPRESS
FULL AUTO BLACK LOLUX
MODE
POWER
ON OFF
VTR
OPEN
VTR
CAM
1
3200K
5600K
5600K
5600K
ND
/
/
ND
2
.3
.4
1
8
1
64
CH-1
AUDIO INPUT
AUDIO SELECT
CH-2
CH-1 CH-2
FRONT
REAR
AUTO
MANUAL
AUDIO
LEVEL
CH-1 CH-2
PULL
OPEN
LCDBRIGHT DISPLAY
MODE
VTR
CAM
STATUS
SHUTTER
MENU
NETWORK
PACK
KA-DV5000
POWER
SUPPLY
ONOFF
POWER switch
MODE switch
STATUS button
VTR trigger button
POWER SUPPLY
switch