Filter
Top Products
24
MONITOR
EDITSEARCH
FILTER
STATUS
SHUTTER
MENU
AUTO IRIS
BACK L
NORMAL
SPOT L
STRETCH
NORMAL
COMPRESS
FULL AUTO BLACK LOLUX
MODE
POWER
ON OFF
VTR
OPEN
VTR
CAM
1
3200K
5600K
5600K
5600K
ND
/
/
ND
2
.3
.4
1
8
1
64
CH-1
AUDIO INPUT
AUDIO SELECT
CH-2
CH-1 CH-2
FRONT
REAR
AUTO
MANUAL
AUDIO
LEVEL
CH-1 CH-2
PULL
OPEN
LCDBRIGHT DISPLAY
STILLSTOPREW
BLANK SEARCH
FF PLAY
STATUS
SHUTTER
MENU
NETWORK
PACK
KA-DV5000
POWER
SUPPLY
ONOFF
7.
Play back the clip.
Turn the SHUTTER dial, move the cursor to REVIEW and press the SHUTTERdial.
● The movie clip is played back after the clip no. flashes. The value of the recorded
pixel size (320 × 240 or 160 × 120) appears during displaying the still image. The
value of the recorded max. bit rate appears during playback.
8.
To pause playback, press the PLAY button.
9.
To resume playback, press the PLAY button once more.
10
.
The following operations are performed when the playback of the selected clip
ends. (When PLAY MODE in the MOVIE CLIP SETUP screen is set to “OFF”)
● When there are no following clips, the unit pauses at the beginning of the current
clip.
● If following clips exist, the clip no. flashes and then playback is performed.
When all remaining clips are played back, the unit pauses at the beginning of the
played back clip.
To move to another clip during playback
\ To move to the next clip during middle of playback or pausing, press the FF
button of GY-DV5000.
● The playback of the current clip stops and the unit pauses at the starting point of the
next clip.
Pressing the FF button again pauses at the starting point of the following the next
clip.
\ To move to the previous clip during middle of playback or pausing, press the
REW button of GY-DV5000.
● The playback of the current clip stops and the unit pauses at the starting point of
the previous clip.
Pressing the REW button again pauses at the starting point of the clip before the
previous clip.
\ To move to the latest clip during middle of playback or pausing, press the FF
button of GY-DV5000 for more than 2 seconds.
● The unit pauses at the starting point of the latest clip.
To start playback, press the PLAY button.
\ To move to the oldest clip during middle of playback or pausing, press the REW
button of GY-DV5000 for more than 2 seconds.
● The unit pauses at the starting point of the oldest clip.
To start playback, press the PLAY button.
● Playback will remain on the current clip
even when the FF button is pressed if the
latest clip is being played back.
● Pressing the REW button during play back
of the oldest clip will start playback at the
starting point of the that clip.
CLIP FUNCTION screen
Movie clip Playing back video/audio recorded on a CF memory card
\ Selecting PAGE BACK during playback or pausing and press the SHUTTER dial
will return to the MOVIE CLIP screen.
IEOVMCIP
L
mc 0 0 8
.
0asf WR/
REVIE
W
DELET
E
PROT
E
C
T
PAGE B
A
CK
IEOVMCIP
L
mc 0 0 8
.
0asf WR/
PLAY
PAGE B
A
CK
PAGE BACK
REVIEW
85k
REW button
FF button
PLAY button
● When PLAY MODE in the MOVIE CLIP
SETUP screen is set to “REPEAT”, re-
peat playback is performed. (
☞
page 7)
SHUTTER
dial
● The video encoded by the KA-DV5000
is so designed that it is displayed in a
correct aspect ratio by personal
computer monitor. When the CF
played-back video is viewed by video-
out connector output of the GY-DV5000
or observed on a liquid crystal monitor
screen, the aspect ratio may look
different. This is because a simple
output is made on the video for a
personal computer and is therefore
normal and not a malfunction.
Memo
The BIT RATE used for
recording is displayed.