Filter
Top Products
29
NET WOR K
TSE P. .U
TSE P. .U
ORTWENKACK
P
ON
C
IG
F
ENCODE
MPEG REC
S
PILT
MOV I E
C
LI
P
IMA N
C
ACNLE
MENU R E S E T
PAGE B
A
CK
TSE PU
(
W
M
Pund
r
8
)
e
(
C
F
Vi
ew
r
)
e
Set to SPLIT
LCD screen
LAN card display
e
No LAN card is inserted when the display
appears. Turn off the power and insert a LAN
card. Then, turn the power back on.
ENCODE SETUP
menu screen
LAN card Sending video using a LAN card (no DV cassette tape recording)
1.
Insert a LAN card into the Network Pack.
2.
Turn on the GY-DV5000 and KA-DV5000 power.
Check to see that the LAN card display is showing on the LCD screen/viewfinder
screen.
3.
Set the MODE switch to “CAM”. (Light the CAM indicator.)
4.
Set the NETWORK PACK CONFIG menu screen.
q Set MPEG REC to “SPLIT”.
w Set the video/audio compress in the ENCODE SETUP menu screen. (
☞
page 6)
• When playing back video/audio streaming data using Quick Time, set STREAM
TYPE in the ENCODE SETUP menu to “for QT”.
e When completed, press the STATUS button to return to the normal screen.
5.
When operating Streamproducer and making network connection with KA-DV5000,
sending of streaming video/audio data will start from the LAN card.
When pressing the VTR trigger button on the side of GY-DV5000, recording to the
HDD will start.
● The LAN card display on the LCD screen/viewfinder screen will be as follows:
ⅷ
e
: Red display during data transmission.
* Perform setting described in “5-2 Operating video from DV camcorder • Trigger
mode function” of network distribution software “Streamproducer” User’s Guide.
6.
To stop recording to the HDD, press the VTR trigger button on the side.
7.
Press the VTR trigger button on the side to resume recording to the HDD.
8.
To end operation, stop the transmission by disconnecting the network connection
with KA-DV5000 using Streamproducer, then turn off the power.
Lastly, remove the LAN card.
Memo
● When MPEG REC is set to “SPLIT”, sending is performed only when the VTR
trigger button on the side is pressed. The VTR trigger buttons on the front and on
the lens are disabled.
● Pressing the VTR trigger button on the side does not record the camera image
onto the inserted DV cassette tape.
MONITOR
EDITSEARCH
FILTER
STATUS
SHUTTER
MENU
AUTO IRIS
BACK L
NORMAL
SPOT L
STRETCH
NORMAL
COMPRESS
FULL AUTO BLACK LOLUX
MODE
POWER
ON OFF
VTR
OPEN
VTR
CAM
1
3200K
5600K
5600K
5600K
ND
/
/
ND
2
.3
.4
1
8
1
64
CH-1
AUDIO INPUT
AUDIO SELECT
CH-2
CH-1 CH-2
FRONT
REAR
AUTO
MANUAL
AUDIO
LEVEL
CH-1 CH-2
PULL
OPEN
LCDBRIGHT DISPLAY
MODE
VTR
CAM
STATUS
SHUTTER
MENU
NETWORK
PACK
KA-DV5000
POWER
SUPPLY
ONOFF
POWER switch
MODE switch
STATUS button
VTR trigger button
POWER SUPPLY
switch
NETWORK PACK CONFIG
menu screen