Filter
Top Products
37
Network pack setup ENCODE PARAMETERS screen
Clicking ENCODE PARAMETERS on the left of the Streamcorder screen displays the ENCODE PARAMETERS
screen for performing video/audio compression settings.
Click the OK icon to
confirm setting.
Screen selection
Setting
Select the setting from the
pull-down menu.
Setting range
ⅷindicates default factory setting.
Item
Frame Size
Bit Rate
Frame Rate
Stream Type
Description
Sets the video compression size.
320 × 240: Sets the image size to 320 × 240 pixels. (CIF)
160 × 120: Sets the image size to 160 × 120 pixels. (QCIF)
(1/4 image size of CIF.)
Sets the video streaming speed.
Sets the frame rate per second. Settings are as shown below.
Sets the player for stream playback.
Setting
ⅷ 320 × 240
160 × 120
56K (bps)
128K (bps)
256K (bps)
ⅷ 384K (bps)
512K (bps)
MAX
ⅷ MID
MIN
ⅷ For Media
Player
For Quick
Time
BIT RATE
FRAME SIZE
(bps)
320 × 240 160 × 120
MAX MID MIN MAX MID MIN
512K
NTSC 15 10 7.5 30 15 10
PAL 12.5 5 5 25 12.5 12.5
384K
NTSC 15 10 7.5 30 15 10
PAL 12.5 5 5 25 12.5 5
256K
NTSC 15 7.5 5 30 15 7.5
PAL 12.5 5 5 25 12.5 5
BIT RATE
FRAME SIZE
(bps)
320 × 240 160 × 120
MAX MID MIN MAX MID MIN
128K
NTSC 7.5 5 3 15 10 7.5
PAL 5 5 1 12.5 12.5 5
56K
NTSC 3 1 1 10 7.5 5
PAL 1 1 1 12.5 5 5
Memo
• No sound will be heard when playing back using QuickTime while in the WMP mode.
• No sound will be heard when playing back using Media Player while in the QT mode.
• Set to WMP mode when recording to CF memory card.