Filter
Top Products
21
Recording on a CF card
Recording playback signals of a DV cassette tape on a CF memory card
1.
Insert a CF memory card into the Network Pack.
2.
Turn on the GY-DV5000 and KA-DV5000 power.
Check to see that the
C
F
display appears on the LCD screen/viewfinder screen.
(When the power is turned on,
display will flash during initialization.)
3.
Insert the recorded DV cassette tape.
4.
Set the MODE switch to “VTR”. (Light the VTR indicator.)
5.
Set the NETWORK PACK CONFIG menu screen.
q Set MPEG REC to “SPLIT”.
w Set the video/audio compression in the ENCODE SETUP menu screen.
(
☞
page 6)
e When completed with settings, press the STATUS button to return to the normal
screen.
6.
Press the PLAY button of GY-DV5000 to start DV cassette tape playback.
7.
Press the VTR trigger button on side panel at the scene to start recording on the
CF memory card.
● During recording, the ⅷ
C
F
display appears in red.
8.
To stop recording, press the VTR trigger button on side panel.
9.
To resume recording, press the VTR trigger button on side panel once more.
10
.
To end recording, press the VTR trigger button on side panel.
* Before turning off the power, check to make sure the
C
F
indicator on the LCD
screen is white.
Memo
● When recording only to the CF memory card, the clip list will not be registered.
● The CF memory card remaining time is displayed on the LCD screen/viewfinder
screen.
● Do not switch over the CAM/VTR mode during recording into the CF card. If the
mode is switched over during recording, the display of the LCD viewer can go
wrong once in a while. Also, if the mode is switched over immediately after the
start of recording into the CF card, some black images can be mixed into a re-
corded picture.
● While recording DV input to a CF Memory Card in the SPLIT mode, do not oper-
ate the VTR section. Recording to the CF Memory Card may stop as a result.
● “NO CF FORMAT!” will appear if the in-
serted CF memory card is not formatted.
Format the card in the MOVIE CLIP SET
menu screen. (
☞
page 18)
LCD screen
C
F
NET WOR K
TSE P. .U
TSE P. .U
ORTWENKACK
P
ON
C
IG
F
ENCODE
MPEG REC
MOV I E
C
LI
P
S
PITL
IMA N
C
ACNLE
MENU R ES E T
PAGE B
A
CK
TSE PU
(
W
M
Pund
r
8
)
e
(
C
F
Vi
ew
r
)
e
NETWORK PACK CONFIG
menu screen
ENCODE SETUP
menu screen
Set to SPLIT
MONITOR
EDITSEARCH
FILTER
STATUS
SHUTTER
MENU
AUTO IRIS
BACK L
NORMAL
SPOT L
STRETCH
NORMAL
COMPRESS
FULL AUTO BLACK LOLUX
MODE
POWER
ON OFF
VTR
OPEN
VTR
CAM
1
3200K
5600K
5600K
5600K
ND
/
/
ND
2
.3
.4
1
8
1
64
CH-1
AUDIO INPUT
AUDIO SELECT
CH-2
CH-1 CH-2
FRONT
REAR
AUTO
MANUAL
AUDIO
LEVEL
CH-1 CH-2
PULL
OPEN
LCDBRIGHT DISPLAY
STILLSTOPREW
BLANK SEARCH
FF PLAY
MODE
VTR
CAM
STATUS
SHUTTER
MENU
NETWORK
PACK
KA-DV5000
POWER
SUPPLY
ONOFF
PLAY button
POWER switch
MODE switch
STATUS button
VTR trigger button
POWER SUPPLY
switch
•
C
F
: Red display during
recording
: Initializing
C
F
LCD Screen
CF memory card remaining warning