Filter
Top Products
CAPTURING VIDEO (cont.)
26 EN
Master Page: Left
Capturing still images
1
Click the Still image button.
2 Click the Capture button.
The video image at the moment that the button was clicked is captured, and the resulting still image file
is registered in the album.
NOTES:
● It is not possible to capture videos or still images if the USB Video Streaming driver is not installed properly.
In this case, refer to “Updating [Device Manager] (Windows
®
)” in “SOFTWARE INSTALLATION AND USB
CONNECTION GUIDE”.
● On the information display panel or the file information dialog, some information such as file-created date
may be incorrect.
Disconnecting the USB cable
1
Disconnect the USB cable.
2 Set the camcorder’s Power Switch to “OFF”.
The camcorder turns off.
Capture
Information display panel
Still image
M4D3+DSC_Soft.book Page 26 Tuesday, December 16, 2003 2:08 PM