Filter
Top Products
CAPTURING VIDEO (cont.)
EN 27
Master Page: Right
When a camcorder is connected to the PC with a USB cable, video can be copied from the camcorder tape to
the PC.
NOTE:
There are differences in the following procedures whether your camcorder is equipped with D.S.C. (Digital
Still Camera) features or not.
1 Set the camcorder’s VIDEO/MEMORY Switch to “VIDEO”. (Only for D.S.C. equipped
models)
2 Set the camcorder’s Power Switch to “PLAY” while pressing down the Lock Button located
on the switch.
The camcorder is now on.
3 Click [Start], go to [All Programs] or [Programs] – [PIXELA] – [ImageMixer], and then click
[ImageMixer Ver.1.7].
● For Macintosh, double-click the [ImageMixer] icon on the PC.
ImageMixer starts up.
4 Click the Input button.
The input mode screen appears.
Capturing video from tape
Input
CONTINUED ON NEXT PAGE
M4D3+DSC_Soft.book Page 27 Tuesday, December 16, 2003 2:08 PM