Filter
Top Products
8
Using the Device
•
Use of any controls, adjustments, or procedures other than those specified
in this manual may result to hazardous radiation exposure.
•
Do not attempt to disassemble the drive.
•
Do not move the device from a cold to a warm or hot environment. Drastic
change of temperature is harmful to the device.
•
Before moving or uninstalling the drive, remove disc from it, if any.
•
Prevent liquids and metal objects to get into the device. If this situation
occurs, contact your retailer for assistance.
•
Do not use any evaporating solvents to clean the device. If you
accidentally sprayed any solvent on the device, use a clean cloth to wipe
it. You may also use a neutral cleaner to dilute the solvent to easily wipe it
from the device.
•
Try not to interrupt the supply of power while the device is in reading or
writing mode.
•
Do not place damaged or warped discs inside the device. A warped disc
may break while in use and damage the device.
•
Do not place discs into the device immediately if they came from a cold
environment, especially during cold seasons. Wait until the discs have
reached room temperature.
Conventions used in this guide
To make sure that you perform certain tasks properly, take note of the following
symbols used throughout this manual.
WARNING/DANGER:
Information to prevent injury to yourself when trying to complete a
task.
CAUTION:
Information to prevent damage to the components when trying to
complete a task.
IMPORTANT:
Information that you MUST follow to complete a task.
NOTE:
Tips and additional information to aid in completing a task.
MP-WDX2E-En.fm Page 8 Friday, September 19, 2003 9:29 AM