Filter
Top Products
19
ENGLISH
Unplugging the MP-WDX2E Device
The MP-WDX2E, when installed, needs to be properly unplugged or disconnected
from the computer to avoid computer to crash or possible data loss.
Follow these steps to safely unplug your MP-WDX2E drive from the notebook or PC
if you are using Windows operating system.
1. Locate the Safely Remove Hardware
icon found in the taskbar.
Double-click on the icon.
2. Select the name of the hardware device
(“JVC MP-WDX2E”), to unplug.
Click Stop.
3. Confirm the device to be stopped.
Again, select the name of the device
you want to unplug.
Click OK.
4. The device can now be safely unplugged from the system.
5. The screen display will go back to the Safely Remove Hardware dialogue box.
Click on Close.
Disconnecting the drive while in use may damage the data
files and/or the drive.
MP-WDX2E-En.fm Page 19 Friday, September 19, 2003 9:29 AM