Filter
Top Products
60 EN
1) Mounting a memory board
1 Check the correct mounting direction of memory board (by observing the cut area).
2 Slant the memory board and insert it into its socket.
3 Push the memory board until it is locked, but do not apply excessive force to it.
Caution
If it is difficult to lock the memory board, make sure that the board has been inserted securely.
Do not apply excessive force to it, or the memory board may be damaged.
2) Removing the memory board
1 Open the right and left support levers of the memory board by pressing them outward.
2 Pull out the memory board in the arrow direction.
5. Return the memory expansion cover, mount the battery pack, and retighten the
four screws.
Caution
The screws have different lengths. Be careful to use the right screw in the right place.
2 3
1
1
1
2
Memory slot direction
Memory board
Memory slot
Memory board
HARDWARE
Position the memory board is such a
way that, when seen from above,
the cut-out is at the tip of the right
corner as shown in the figure.