Filter
Top Products
EN 59
Adding or Removing a Memory Board
If you have operated your PC, its inside may be hot and you may get a burn. Turn the power
switch off and wait for the PC to cool down.
1. Turn the PC Power switch off, and disconnect AC adapter from your PC. Then,
remove the standard lithium ion battery pack (if any) and all other peripherals
from your PC.
2. Remove the built-in lithium ion battery pack and the memory expansion cover by
taking the following steps.
1) Turn your PC upside down, and remove screws 1 to 4.
2) Remove the built-in lithium ion battery pack.
3) Open the memory expansion cover.
Cautions
• Screw 1 (10 mm) is different in length from screws 2 to 4 (3 mm). Using a wrong screw can
damage your PC.
• Do not loosen any other screws, otherwise, your PC may fail.
3. Discharge any static electricity from your body by touching something metallic
nearby. (Not on the PC)
4. Add or remove a memory board.
Caution
Add the 256M-byte memory board to expand the PC’s memory capacity of the MP-XP731GB
to the maximum 512M-bytes. Refer to page 60 for the procedure to mount and remove the
memory board.
Built in
battery pack
1)
2)
3)
Remove the
battery pack by
sliding it in this
direction.