Filter
Top Products
2828
2828
28
Resource Configuration:
PCI Latency Timer (PCI Clocks): The default is 32. It is recommended to keep
the default value unless the inserted PCI expansion cards’ specifications
require other settings.
Primary Graphics Adapter: This allows you to select [AGP] or [PCI] as the
primary graphics adapter.
Peripheral Configuration:
OnBoard FDC: Use this to enable or disable floppy drive controller.
OnBoard Serial Port: Use this to set addresses for the onboard serial ports or
disable serial ports. Configuration options: [Auto], [Disabled], [3F8 / IRQ4 /
COM1], [2F8 / IRQ3 / COM2], [3E8 / IRQ4 / COM3], [2E8 / IRQ3 / COM4].
AMIBIOSSETUPUTILITY-VERSION3.31a
Advanced
OnBoard FDC
OnBoard Serial Port
OnBoard Infrared Port
OnBoard Parallel Port
Parallel Port Mode
EPP Version
Parallel Port IRQ
Parallel Port DMA Channel
OnBoard Midi Port
Midi IRQ Select
OnBoard Game Port
OnBoard PATA-IDE
OnBoard LAN
OnBoard AC'97 Audio
[ SetupHelp ]
F1:Help
Esc:PreviousMenu
F9:SetupDefaults
F10:Save&Exit
+/-:ChangeValues
Enter:Select
Sub-Menu
:SelectItem
Peripheral Configuration
Auto
Disabled
Auto
ECP+EPP
1.9
Auto
Disabled
5
200h
Enabled
Auto
Auto
Enabled
Auto
<Enter> to enable or
disable the floppy
drive controller.
AMIBIOSSETUPUTILITY-VERSION3.31a
Advanced
PCI Latency Timer (PCI Clocks)
Primary Graphics Adapter
[ SetupHelp ]
F1:Help
Esc:PreviousMenu
F9:SetupDefaults
F10:Save&Exit
+/-:ChangeValues
Enter:Select
Sub-Menu
:SelectItem
ResourceConfiguration
PCI
32
<Enter> to select PCI
clocks. Leave on
default setting for the
best PCI performance.