Filter
Top Products
Stopping/pausing
recording
• Operation
is
possible
with
either the main unit or the remote controller.
• Erasing a recording
• To pause recording
•
Press
the [PAUSE] button.
If five minutes elapse
in
pause mode, the
rotating head moves away from the tape
to protect the tape. (The
REC
indicator
blinks.1
• To stop without recording
an
END-ID (See page
26)
•
Press
the [STOP/EJECT] button or press
the remote controller's [STOP] button .
• To stop after recording
an
END-ID (See page
26)
• During recording, press the [FF/CUE] but-
ton for at least
two
seconds. (After the
EN
D-I
D
is
recorded for nine seconds, the
unit enters stop mode.1
• To erase a tape, set the unit to record mode
with
nothing connected to the [DIGITAL I/O] jack.
•
Do
not attach the separately sold AID converter unit.
20
DX-7