Filter
Top Products
6.1 IP Addresses Ranges
25
Domain type specification Type (domain) of IP addresses group. This option defines,
how will the packets, whose source and target address belong to this group, be pro-
cessed. The group of addresses can be included in one of the following domains:
• LAN — local network. The specific property of this group is that all captured
addresses from this group are added to the list of computers (see chapter 7.1).
• Internet — addresses from this group are measured but no list is created from
them.
• discard data
if source or target address belongs to this group, the volume of the data in this
packet will not be counted.
Note: The volume of the data in the packet will be measured only when one of the
addresses (source or target) in the packet header belongs to the group LAN and the
other to the group Internet. Details are to be found in the chapter 3.2.
The rule above is valid for Specification of the protocol and the port, which is this
rule valid for. This way it is possible to define e.g. that only data for particular service
will be measured.
• All protocols — the rule will be valid for all protocols (and therefore also for all
services)