Filter
Top Products
6.6 WWW Interface Parameters
35
The ICMP protocol and UDP protocol options are used for setting the above described
intervals .
TCP connection timeout The TCP protocol is relation based (first the relation, which
the data is transferred in, is created). In this case we know exactly the time of creating
and dropping the connection. If a small amount of data is transferred using a fast
line the connection can last only a small time (often less than 1 second). In order
to enable the user to watch the connection in the window Current connections (see
chapter
7.3), it is left displayed for some time after the end of the connection. This
time is set by the Closed TCP connections are kept displayed for option.
6.6 WWW Interface Parameters
The WWW tab serves for setting the parameters of Kerio Network Monitor WWW inter-
face.
WWW server enabled at port This option enables/disables the embedded WWW server.
If set off, WWW interface is not available.
Here is also specified the port, which is the WWW server running on (default 81). If
there is no other WWW server running on the computer where Kerio Network Monitor