Kodak i250 Scanner User Manual


 
A-61167 September 2002 7
Installing the Scanner
Site Specifications Place the scanner:
in a clean area with temperature and relative humidity typical of an
office environment
IMPORTANT: Only use the scanner and power supply indoors in a
dry location.
on a stable, level work surface capable of supporting the following weights:
- i250 Scanner: 12.5 kg (27.5 lb.)
- i260 Scanner: 13.9 kg (30.5 lb.)
- i250 Scanner with optional flatbed accessory: 19.8 kg (43.5 lb.)
- i260 Scanner with optional flatbed accessory: 21.2 kg (46.5 lb.)
within 1.52 metres (5 feet) of an electrical power outlet
NOTE: For more information about the scanner specifications, refer to
Appendix A, Specifications.
System Requirements Following is the minimum system configuration to run the i250 Scanner or
i260 Scanner.
NOTE: The actual performance of the system depends on the scanning
application, choice of scanning parameters, and the host computer
configuration. If the scanner is not performing at the optimal speed,
a faster computer and/or more RAM may be necessary to obtain the
rated throughput.
IBM PC (or compatible) with a Pentium III 1GHz processor
Microsoft Windows 98SE, Windows Me, Windows 2000, or Windows XP
100 MB of available hard disk space (200 MB is recommended)
128 MB RAM
Monitor (VGA)
•Mouse