Filter
Top Products
A-61167 September 2002 C-11
Purging an Ink
Cartridge
One ink cartridge is included with your i200 Series Imprinter. You must purge
the ink cartridge before installing it.
1. Remove the ink cartridge from the box and inner packaging.
2. Hold the cartridge and insert a straightened paper clip into the larger hole
on the top of the ink cartridge.
3. Rotate the ink cartridge until the bottom is face up.
4. Gently press the paper clip against the side of the ink bladder until a small
bead of ink appears on the ink flow point on the ink cartridge bottom.
CAUTION: Do not puncture the ink bladder with the paper clip.
5. Remove the paper clip.
6. Allow the ink bead to absorb back into the ink cartridge.
7. Blot the excess ink with a lint-free tissue.
CAUTION: Do not touch the ink flow point or you may cause improper
ink flow.