Kodak i250 Scanner User Manual


 
A-61167 September 2002 E-1
Appendix E Installing Optional Memory
The scanner comes installed with 64 MB of memory. This may be sufficient for
your scanning needs. However, up to 256 MB of memory (SODIMM) may be
installed in the scanner to accommodate long document scanning or scanning
with certain scanner features (e.g., auto-crop at 300 dpi or higher).
Maximum document sizes:
With standard memory (64 MB): 29.7 x 43.2 cm (11.7 x 17 in.)
With extended memory (256 MB): 29.7 x 66.0 cm (11.7 x 26.0 in.)
IMPORTANT: Use proper precautions to avoid static when you install memory.
1. Power down the scanner.
2. Remove any documents from the feeder area.
3. Disconnect the power cord from the back of the scanner.
4. Disconnect the IEEE-1394 (FireWire) cable from the IEEE-1394 port on
the back of the scanner.
5. Remove the scanner’s output tray.
6. Lift up the scanner door release to unlatch the scanner door.
7. Pull up to open the scanner door.