Konica Minolta 282 Switch User Manual


 
Installing the fax driver
2
Fax Driver 2-14
8 Click the [Next] button.
9 In the “Printer Name or IP Address” box, enter the IP address for this
machine, and then click the [Next] button.
If the Additional Port Information Required dialog box appears, go
to step 10.
If the Finish screen appears, go to step 13.
If both the LPR and Port9100 settings are enabled on the machine,
the fax driver and the machine are connected by LPR.
10 Select “Custom”, and then click the [Settings] button.
11 Change the settings according to the port, and then click the [OK] but-
ton.
For an LPR connection, Select “LPR”, and then enter “Print” in the
“Queue name” box.
For a Port9100 connection, select “RAW”, and then enter the RAW
port number (9100 at default) in the “Port Number” box.
The information entered here is case-sensitive.
12 Click the [Next] button.
13 Click the [Finish] button.
The Add Printer Wizard appears.
14 Click the [Have Disk] button.
15 Click the [Browse] button.