Konica Minolta 282 Switch User Manual


 
Installing the fax driver
2
Fax Driver 2-17
5 Click “Add a local printer”.
The Select a Printer Port dialog box appears.
6 Click “Create a new port”, and select “Standard TCP/IP Port”.
For a parallel connection, select “LPT1” beside “Use an existing
port”.
7 Click the [Next] button.
For a parallel connection, continue with step 13.
8 Select “TCP/IP Device”, and then enter the IP address.
When both LPR and Port9100 are enabled for this machine, the fax
driver and the machine is connected with LPR.
9 Click the [Next] button.
If the Additional Port Information Required dialog box appears, go
to step 10.
If the Install the printer driver dialog box appears, go to step 13.
10 Select “Custom”, and then click the [Settings] button.
11 Change the settings according to the port, and then click the [OK] but-
ton.
For an LPR connection, select “LPR”, and then enter “Print” in the
“Queue name” box.
For a Port9100 connection, select “RAW”, and then enter the RAW
port number (9100 at default) in the “Port Number” box.
The information entered here is case-sensitive.