Filter
Top Products
Closing the Remote Panel Utility3-4
User Service Tab
Top Adjustment—Allows the vertical print position to be finely adjusted.
Left Adjustment—Allows the horizontal printer position to be finely adjusted.
Transfer Power—Set the 2nd Transfer voltage for the Media type.
Service's Choice
GDI Timeout—Specifies the amount of time until communication with
the printer times out.
Energy Save—Specifies whether or not the Energy Save mode is
enabled. The length of time until the machine enters Energy Save
mode can be specified from the Panel tab.
" This menu is displayed only on the Americas model.
Flicker—Set fuser heater power.
Image Adj Param—Use when print quality is reduced in environments such
as high altitudes.
Print Pattern 1, Print Pattern 2—Prints a test pattern so the print result can be
checked.
A black-and-white test pattern can be printed with "Print Pattern 1", and a
color test pattern can be printed with "Print Pattern 2".
Download—Downloads the current printer settings and displays them in the
utility.
Upload—Sends the current utility settings to the printer.
Closing the Remote Panel Utility
To close the Remote Panel Utility, right-click the Remote Panel Utility icon in
the Windows notification area (right end of the taskbar), and then choose
Exit.
" When the Close button in the lower-right corner of the Remote Panel
Utility window is clicked, the window is closed, and the utility remains
miniaturized as an icon in the notification area. (The utility is not
closed.) Double-click the icon to open the Remote Panel Utility win
-
dow again.
" Wait at least 5 seconds before opening the Remote Panel Utility again
after it has been closed.