Filter
Top Products
3. Control Panel Keys and Indicators
2-13
Scanner
Chapter 2
When (Misfeed/Call-Tech.-Rep. Code) Lights up
This indicates that a paper misfeed or malfunction has occurred in the system. Check the code
shown on the Multi-Print Display and perform the misfeed clearing procedure or the Call-
Tech.-Rep. procedure.
Code
Description
The Projection Lamp is burned out. Replace the lamp.
☞ See p. 2-41.
* If the lamp goes out during a print cycle, a blank print may
be output.
The battery for Date Print has run down.
Turn OFF the Date Print function, or call your Tech. Rep. for
replacement of the battery.
The power to the printer is OFF or there is a problem with the
connection of the interface cable to the printer. Turn ON the
printer or make sure that the interface cable is securely con-
nected.
The upper cover of the printer is not closed. Make sure that it
is completely closed.
The printer is out of paper. Load some paper into the paper
cassette.
☞ See p. 3-5.
The Scanner is connected to the PC and ready for scanning by
pressing the Start Key. This display is blinking when the Scan-
ner is in operation.
The Scanner is not connected to the PC. Turn ON the PC or
connect the Scanner to the PC with the interface cable.
Malfunctions Procedure