Filter
Top Products
31
Replacing the Lens and Field Calibration
6
Attach the lens hood.
Align the cutouts, and then turn clockwise.
M
emo
The hood must be turned until it contacts the bayonet mount
socket.
7
Press any key.
After several dozen seconds, “PLEASE OPEN LASER BARRIER AND PRESS ANY KEY” will be
displayed on the viewfinder.
8
Press any key.
The viewfinder displays the monitor screen, and the digitizer is ready for use.
Note
Place a lens cap on the lens you removed, put it in its case, and store in a safe place.
9
Use the field calibration system and the Polygon Editing Tool software to calibrate the
system.
For the field calibration procedure, refer to “Field Calibration” on the next page.
R
ef.
Vivid910-hard-E.book Page 31 Monday, October 18, 2004 3:11 PM