Filter
Top Products
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your TP-125 / TP-126
4
is preferred. However, unshielded twisted pair (UTP) cable should be
installed far away from sources of electromagnetic interference such as
electric cables and motors.
It is recommended to use shielded twisted pair (STP) skew-free Kramer cable
BC-SXTP for transmitting VGA signals, and shielded twisted pair (STP)
non-skew-free Kramer BC-STP cable for digital signals.
3.2 Recommendations for Achieving the Best Performance
To achieve the best performance:
Use only good quality connection cables
1
to avoid interference,
deterioration in signal quality due to poor matching, and elevated
noise levels (often associated with low-quality cables)
Avoid interference from neighboring electrical appliances that
may adversely influence signal quality and position your Kramer
TP-125/TP-126 away from moisture, excessive sunlight and dust
Caution – No operator-serviceable parts inside unit.
Warning – Use only the Kramer Electronics input power
wall adapter that is provided with this unit
2
.
Warning – Disconnect power and unplug unit from wall
before installing or removing device or servicing unit.
4 Your TP-125 / TP-126
This section defines the:
TP-125, UXGA / Audio / Data Line Transmitter (see section 4.1)
TP-126, UXGA / Audio / Data Line Receiver (see section
4.2)
1 Available from Kramer Electronics on our Web site at http://www.kramerelectronics.com
2 For example: model number AD2512C, part number 2535-000251