Filter
Top Products
CHAPTER 3 PREPARATIONS BEFORE USE
3. Replacing the toner container and waste toner tank
When the level of toner becomes low, the Add Toner indicator lights
and a toner replacement message is printed out. When the message
is printed, replace the toner container and waste toner tank
immediately. It is still possible to make copies, one at a time, with the
indicator lit. However, if copying is continued under this condition, the
Start indicator will eventually go off and copying will become disabled.
Be sure to replace the waste toner tank when replacing the toner
container. Use the new waste toner tank that is supplied with the toner
container.
The toner replacement message is as follows:
“Replace waste toner tank at the time of toner container exchange
surely, and do charge wire cleaning.”
* Replenish toner only when the Add Toner indicator is lit.
* Replace the toner container with the main switch turned ON (|).
(English text panel) (Symbol panel)
CAUTION
Do not incinerate toner and toner containers. Dangerous
sparks may cause burns.
WARNING
High voltage is present in the charger section. Take
sufficient care when working in this area, as there is a
danger of electrical shock.
1
Open the front cover.
2
Remove the waste toner tank.
3
Close the opening of the waste toner tank with its seal.
CAUTION
Do not incinerate toner and toner containers. Dangerous
sparks may cause burns.
3-7
1 2