Filter
Top Products
CHAPTER 7 WHEN A PROBLEM OCCURS
(3) Removal procedures
1 Misfeed in paper feed section
● Misfeed in drawer
If the upper drawer indicator flashes green when the drawer is used, a
misfeed has occurred in the drawer. Remove the misfed paper using
the procedure given below.
NOTE
If a paper misfeed occurs in the lower drawer, remove the misfed
paper using the same procedure.
1
Open the drawer.
2
Remove the misfed paper while taking care not to tear it.
* If the paper should be torn, remove all the scraps from the
inside the copier.
3
Close the drawer slowly.
* Check that the paper is kept under the claw of the drawer. If
not, reload the paper.
● Misfeed in multi-bypass
If the multi-bypass indicator flashes green when the multi-bypass is
used, a misfeed has occurred in the multi-bypass. Remove the misfed
paper using the procedure given below.
1
Remove all the paper remaining in the multi-bypass.
2
Check that the indicator showing the location of the paper
misfeed has turned off and re-load the paper into the multi-
bypass.
2 Misfeed in left cover
If the misfeed indicator lights red, a misfeed has occurred in the left
cover. Remove the misfed paper using the procedure given below.
1
Open the multi-bypass.
2
Open the left cover.
7-5